Basecoats 2

This is placeholder copy and should be a sentence or two overview of the Basecoats.

Note: When a waterproofing system is not necessary, our topcoats can be used as base coats for broadcasted aggregate or vinyl flakes.

A single component, liquid applied, moisture cured, aromatic polyurethane elastomeric waterproofing base membrane. It works well with concrete, metal, plywood, and it can be applied at various thicknesses.

A two component, fast setting, fast curing, solvent free, flexible, high performance, and high solids polyurethane elastomeric coating that can be applied to suitably prepared interior or exterior concrete, plywood and metal surfaces. Due to its fast gel time, AQUATECH 260 is suitable for applications in temperatures as low as 20°F (-6°C). It may be applied in single or multiple applications and can be applied at any rate to achieve desired thickness. AQUATECH 260 is also relatively insensitive to moisture and temperature, allowing applications in varied temperatures and humidity.

A single component, proprietary liquid thickener/accelerator for Hightech base membranes. This accelerator enhances the moisture curing characteristics that accelerates the cure time and causes the coating to thicken. AQUATECH XL is designed to be used with AQUATECH 220.

A single component, liquid applied, bitumen modified, coal tar free, moisture cured polyurethane waterproofing membrane. SEALTECH 5000H is in complete compliance with SCAQMD air quality standards, and has VOC levels equal to or less than 100 grams per liter.

A single component, liquid applied, bitumen modified, coal tar free, moisture cured polyurethane waterproofing membrane. SEALTECH 5000V is in complete compliance with SCAQMD air quality standards, and has VOC levels equal to or less than 100 grams per liter.

A two component, liquid applied, asphalt extended aromatic polyurethane that adheres to most substrates to form a waterproof membrane. SEALTECH IM-129 is ANSI/NS F-61 approved for contact with Potable Water.